Good Wholesale Vendors Panel Clean Room - Standard pass window – TekMax

In clean workshops, micro-technology, biological laboratories, pharmaceutical factories, hospitals, food processing industries, LCDs, electronics factories, etc., all places that require air purification need to use transfer windows.
The transfer window is managed according to the cleanliness level of the higher-level clean area connected to it. For example, the transfer window connected between the coding room and the filling room should be managed according to the requirements of the filling room. After get off work, the operator in the clean area is responsible for cleaning the internal surfaces of the transfer window and turning on the UV sterilization lamp for 30 minutes.
The material of the transfer window must be strictly separated from the people flow channel when entering and exiting the clean area, and the material in the production workshop should enter and exit through the special channel.
The transfer window is suitable for transportation by general transportation. During transportation, it is protected from rain and snow to avoid damage and corrosion.
The transfer window should be stored in a warehouse where the temperature is -10℃~+40℃, the relative humidity is not more than 80%, and there is no corrosive gas such as acid and alkali.
When unpacking, work in a civilized manner, and no rough or barbaric operations are allowed to avoid personal injury.
After unpacking, first confirm whether the product is the specified product, and then carefully check the contents of the packing list whether there are missing parts and whether the parts are damaged due to transportation.
The transfer window is installed in a convenient location on the wall, and then open a hole. The hole is generally about 10MM larger than the outer diameter of the transfer window. Put the transfer window into the wall, generally install it in the middle of the wall, keep balance and fix it, use rounded corners or other The decorative strips are used to decorate the gap between the transfer window and the wall, which can be sealed by glue.